Categories
- - Deep Well Submersible Pump
- - End Suction cenfrigual Pump
- - End Suction Close cenfrigual Coupled Pump
- - Fire Pump
- - Gear Pump
- - Horizontal Multistage Pump
- - Horizontal Split Casing Pump
- - Motors
- - Pressure Booster Pump
- - Submersible Pump
- - Valves & others
- - Vertical in-line Pump
- - Vertical Multistage Pump
- - Vertical submersible Pump
- - Vertical Turbine Pump
Author Archives: safeway
Solenoid Valve AD16 (N.O)Fact sheet download >>>>>>>>>>>>>>>
Specifications:
1. 2 ways normally open
2. Cast Stainless Steel or Brass Body
3. Pilot kick diaphragm type
4. Installation: Mountable in any position but level position is best for longer durability
5. Standard Voltage: AC110V/220V (50/60 Hz)
6. Other voltage of AC or DC is available when required
7. Weather proof coil, Class F
8. ISO Standard
9. Diaphragm Material: EPDM
Solenoid Valve AD12 (N.C)Fact sheet download >>>>>>>>>>>>>>>
Specifications:
1. 2 ways normally closed
2. SS304, Gunmetal or Brass Body
3. Pilot kick diaphragm type
4. Installation: Mountable in any position but level position is best for longer durability
5. Standard Voltage: AC110V/220V (50/60 Hz)
6. Other voltage of AC or DC is available when required
7. Weather proof coil, Class F
8. ISO Standard
Remote Float Control ValveFact sheet download >>>>>>>>>>>>>>>
Working Conditions
- Medium: Water
- Temperature: 0 ~ 70º C
- Pressure: PN 10, PN 16, PN 25
Technical Specifications
- Design Standard: EN 1074-5
- Test Standard: EN 12266-1 (ISO 5208)
- Face to Face Dimension: EN558-1 Series 1
- Drilling Flange: EN 1092-2 (ISO 7005-2)
- Protection: Fusion Bonded Epoxy Coated
Applications
- Water Plant
- Pipeline
- Building
DRAKOS GLOBE VALVEFact sheet download >>>>>>>>>>>>>>>
- Rising stem globe valve
- Used as closing or discharging devices for water, steam, air & others non-
- Design standard: DIN 3356
- Working temperature: Maximum 120º C
- Nominal pressure: 16 bar (other rating also available on request)
- Body tested pressure: 24 bar
- Sealing tested pressure: 17.6 bar
- Hydraulic test standard: DIN 3230
- Face to face according to: DIN 3202-F1
- Flange drilling to: DIN 2533
- Fusion bonded epoxy coated internally and externally
- Used as closing or discharging devices for water, steam, air & others non-
- Design standard: DIN 3356
- Working temperature: Maximum 120º C
- Nominal pressure: 16 bar (other rating also available on request)
- Body tested pressure: 24 bar
- Sealing tested pressure: 17.6 bar
- Hydraulic test standard: DIN 3230
- Face to face according to: DIN 3202-F1
- Flange drilling to: DIN 2533
- Fusion bonded epoxy coated internally and externally
DRAKOS GATE VALVEFact sheet download >>>>>>>>>>>>>>>
- Resilient seated gate valve
- For water and sewage use
- Design standard: BS5163, EN1074-2
- Working temperature: Maximum 70º C
- Nominal pressure: 16 bar (other rating also available on request)
- Body test pressure: 24 bar
- Sealing test pressure: 17.6 bar
- Hydraulic test standard: BS6755, EN12266-1 (ISO 5208)
- Face to face according to BS5163, EN558-1 Series 1
- Flange drilling to: BS4504, EN1092-2 (ISO7005-2)
- Fusion bonded epoxy coated internally and externally
- For water and sewage use
- Design standard: BS5163, EN1074-2
- Working temperature: Maximum 70º C
- Nominal pressure: 16 bar (other rating also available on request)
- Body test pressure: 24 bar
- Sealing test pressure: 17.6 bar
- Hydraulic test standard: BS6755, EN12266-1 (ISO 5208)
- Face to face according to BS5163, EN558-1 Series 1
- Flange drilling to: BS4504, EN1092-2 (ISO7005-2)
- Fusion bonded epoxy coated internally and externally
LP(T) Series Vertical Turbine PumpFact sheet download >>>>>>>>>>>>>>>
Application
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60 and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
Performance Data
Capacity: 8 to 60,000 m³/h
Head: 3 to 150m
Motor Power: 1.5 to 3,600 kw
Medium Temperature: up to 60º
LJC Series Vertical Turbine PumpFact sheet download >>>>>>>>>>>>>>>
Application
Suitable to lift normal temperature clean water without erosive for water plant (in and overhaul and leakage), power plant (when reduce the temperature in the recycle and for domestic service), steel works (for scale pit), fire fighting, urban water supply by water plant and agriculture irrigation.
Performance Data
Capacity: up to 2500 m³/h
Motor Power: 5.5 to 710 kw
Rated Voltage: 380 to 440V, 6kV, 10kV
Well Diameter: 100 to 750 mm
Max. Discharge Diameter: 450 mm
Double Stage Pump – ACTFact sheet download >>>>>>>>>>>>>>>
Applications
It is suitable for using in the occasions which require large flux and high lift, such as iron works, electric power plant and pump station, etc. It is applicable for feeding such as water or liquid similar to water at the temperature from -10º C to 80º C.
It is suitable for using in the occasions which require large flux and high lift, such as iron works, electric power plant and pump station, etc. It is applicable for feeding such as water or liquid similar to water at the temperature from -10º C to 80º C.
Product Characteristic
- Water inlet and outlet are installed in pump body. Just hoist the pump cover when overhaul, greatly facilitating maintenance.
- Primary stage double suction and secondary stage suction of impeller adopted, greatly improving anti-cavitations performance of pump and decreasing axial dimension of pump.
- At rotary speed of 1480 rpm, avoiding caused by high rotary speed.
- In comparison with single stage pump, the products have same performance and smaller diameter and stable operation.
- The pumping chamber adopts double volute design, reducing radial force.
- Fully mechanical seal ensures no leakage within 8000 hours and packing seal is customizable.
- The pump rotation is clockwise and anti-clockwise rotation is customizable.
Materials:
- Pump casing: Cast Iron, Ductile Cast Iron, Cast Steel
- Impeller: Cast Iron, Ductile Cast Iron, Cast Steel or Stainless Steel
- Shaft: Stainless Steel
- Seal Ring: Cast Iron, Ductile Cast Iron or Stainless Steel
Horizontal Split Casing Pump – Type ACTFact sheet download >>>>>>>>>>>>>>>
Applications:
Suitable for handling water slight impurities in industries, Water Works, Storm Water, Irrigation, Sprinkle Irrigation, Fire Fighting, Air-conditioning Plants, Water Circulation, Waste Water Treatment Plants, Processing Plants, Power Plants, Fertiliser Plants, Refinery, Paper, Sugar and Textile Mills etc.
Design
Single stage, axially split volute casing pump with double flow radial impeller, for horizontal and vertical installation. Drive shaft end of the horizontal pump optionally on the left or right side.
Operating Data:
- Pump Size: 80 to 800mm
- Capacity: up to 11600 m³/h
- Head: up to 200m
- Working Temperature: up to 105º C
- Solid Grains: up to 80 mg/L
- Working Pressure: up to 25 bar
- Testing Pressure: up to 37.5 bar
Materials:
- Pump casing: Cast Iron, Ductile Cast Iron, Cast Steel, Stainless Steel
- Impeller: Cast Iron, Bronze or Stainless Steel
- Shaft: Steel or Stainless Steel
Horizontal Split Casing Pump – Type SS seriesFact sheet download >>>>>>>>>>>>>>>
Applications
It is suitable for water supply and drainage in factories, mines, cities and electric station, waterlogged land drainage and irrigation of farming land and carious hydraulic projects.
Features and Benefits
- Low Noise
- Stable Running
Single stage, axially split volute casing pump with double flow radial impeller, for horizontal and vertical installation. Drive shaft end of the horizontal pump optionally on the left or right side.
Technical Data
- Diameter meter: 150mm to 800mm
- Head Range: 10m to 135m
- Working Temperature: up to 80º C
Materials:
- Pump casing: Cast Iron, Ductile Cast Iron, Cast Steel, Stainless Steel
- Impeller: Cast Iron, Bronze or Stainless Steel
- Shaft: Steel or Stainless Steel